Products for All Environments

Covering your water jetting protection needs in all environments and situations.

Waistcoat with Apron

A thoughtful combination between Waistcoat and Apron giving superior freedom of movement and comfort, but still offering effective protection for the whole front of the body. The construction with a Waistcoat on top helps spreading the weight of the protective garment.The height of the Apron can be adjusted and the size of the Waistcoat can be adjusted with velcros – this means that it can be used by different operators or for different purposes. Hand Protections and Gaiters or Boots 3000 are suitable complements for extended protection.

Weight 3.3 kg / 7.3 lbs. (Waistcoat with Apron 20/30).

Size One size.



The full area of the Apron has built-in protection. The position of the Apron can be changed through the adjustable shoulderband. The special construction of this band helps spreading the weight of the Apron which is an important comfort detail. The Apron can be upfolded and fastened, for easier work in stais and on ladders. Very easy to put on and off. Recommended for work on flat surfaces and is often used in combination with Hand Protections and Gaiters or Boots 3000. The Apron comes in one size.

Weight 1,4 kg / 3.0 lbs. (Apron 20/30).

Size One size.


Hand Protection

The Hand Protection protects the hand and the forearm. The entire area is protected. Easy to put on and a thumb strap keeps it in place. A wide velcro makes it easy to adjust for different arms and clothing. Often used in combination with Waistcoat or Apron. (Hand Protection is integrated in the Overall and the Jacket.) Specific right and left hand designs.

Weight 0.3 kg / 0.6 lbs. (Hand Protection 20/30).

Size One size.


Boots 3000

Boots 3000 withstands “everything” within waterjetting on account of its fixed aluminium gaiters. The gaiters are moulded and jointed, which gives both excellent comfort and mobility. The Boots conform to the requirements set out in BGR 191 and EN 345-1 99A5 S5.

Weight 1.9 kg / 4.2 lbs. each (Boot 3000 size 9).

Size Eur 42-48 / US 8.5, 9, 10, 11, 12, 13.5



The balaclava, which is made of neoprene, is designed to keep the body dry. The breast lap is made of Cordura fitted with adjustable straps to hold it in place. The Balaclava offers no protection against waterjetting. Can ideally be used together with the Overall.

Size One size.

Art. No. 5010000 5000



The Gaiters are to be worn outside of the user´s regular protective boots. The entire area round the leg and the foot is protected. Three clips and velcro in the rear, and an easily adjustable strap under the sole, ensure that the Gaiters stay in place. Very comfortable and light to wear. Sold in pairs.

Weight 1.0 kg/2.2 lbs.

Size One size.


Hose Protection/Shroud

Hoses break and couplings break, often very close to the operator and at sensitive areas of the body, such as the abdomen, the arm pit or the neck. These areas are difficult to protect properly. To further improve the safety of the operator, it is recommended to use a Hose Protection/Shroud.
The Hose Protection is placed on the hose at the connection to the pistol. Closest to the pistol, where the hose is most likely to break, there is a
250 mm / 9.8 in. solid steel collar. This provides effective protection for the operator as it has been tested for 3000 bar / 43500 psi. An adjustable strap holds the Hose Protection/Shroud to the pistol. The Hose Protection/Shroud is smooth and flexible.

Available in 3 lengths: 750, 1400, 1800 mm / 2.5, 4.6, 5.9 ft., and 3 diameters: 36, 47 (swivel) and 59 mm / 1.42, 1.85 (swivel) and 2.32 in.

Weight 2.3 kg / 5.1 lbs. (Hose Protection diameter 59 mm, length 1400 mm / 2.32 in., length 4.6 ft.).